search
 
Products
Products
Rupture Disk (RD) Safety Circulating Valve

Rupture Disk (RD) Safety Circulating Valve

 
Rupture disk (RD) safety circulating valve functions as both a safety valve and circulating valve. The tool functions as a safety valve when the annulus pressure reaches a predetermined value. At that pressure, the valve isolates the workstring below the tool and establishes communication between the annulus and the workstring above the tool. This tool converts into a circulating valve when the ball valve section is removed.
 
Features and Benefits
The tool is composed of three major sections:
- The power section consists of a power mandrel case and rupture disk that is available for a wide range of pressure applications. The rupture disk bursts at a predetermined pressure, allowing annulus pressure to be applied to a differential area on the power mandrel. The power mandrel moves down, first pushing the ball valve closed, and then opening a set of circulating ports.
- The circulating section consists of a set of ports that are initially sealed by the power mandrel. When the rupture disk bursts, the power mandrel moves down, exposing the ports that allow communication between the annulus and workstring.
- The safety valve consists of a ball valve, operating pins, and collet fingers. As the power mandrel moves down, the operating arms close the ball valve. The collet fingers expand, allowing the power mandrel to continue traveling down to open the circulating ports.
 

Operation

Before the RD safety circulating valve is used, the operating pressure is calculated for selecting the proper rupture disk pressure rating. Required information includes mud weight, testing depth, bottomhole temperature, and maximum annulus pressure.
When the rupture disk safety circulating valve is run with an annulus pressure-operated valve, the safety valve operating pressure should be kept l,000 psi above the operating pressure of the tester valve.

 


Nominal Tool Size in.
 
 
OD in. (cm)
 
ID
in. (cm)
 
Thread Connections
 
Service Temperature*
°F(°C )
 
Length in. (cm)
 
 
Tensile Rating** lb (kg)
 
Working Pressure*** psi (bar)
 
Flow area in.2 (cm2)
 
Number of Ports
 
3 7/8"
3.90
(9.91)
1.77
(4.50)
 
2 7/8 CAS
 
 
400 (204)
75.4
(191.5)
264,330
(119 900)
15,225
(1050)
1.758
(11.34)
 
4
 
5"
5.02
(12.75)
2.24
(5.70)
NC38
3 7/8 CAS
 
400 (204)
72.56
(184.3)
478,493
(217 041)
15,000
(1034)
3.142
(20.268)
 
4